I-JOIST SPECIFICATION ORDER SHEET
The following is the minimum information required to ensure that the
correct I-Joist is ordered.
Just print it off and fill in the details . Click
for printable version.
Job Specification Name / No
................................................................................................................................................
...............................................................................................................………………………….
Other references:
................................................................................................................................................
.....................................................................................................................................………..
| EXAMPLE
|
INFORMATION
REQUIRED |
ORDER
|
| 30 |
No.
of joists |
|
| APA-EWS PRI
|
Trademark
|
APA-EWS PRI
|
| check |
BBA
Certificate No. |
|
| 241 mm (9-1/2")
|
Depth
|
|
| 9-1/2" PRI
- 40 |
Joist
Designation |
|
| 4.15m |
Length
|
|
Notes to Specifiers
- Select either Load-Span Table 1 or Table 2 depending
on type of floor construction
- Choose either single or double span
- Select appropriate joist depth, centre spacing
and floor span to meet requirements
- Read information across to the corresponding Joist
Designation column
- Enter all information onto the order sheet
- Only give BBA Certificate number if specific proprietary
joist preferred (all APA PRI-400 I-Joists from different manufacturers
are interchangeable)
- Enter number of I-Joists required
|
